Wholesale Alternator - Cummins Engine Part Camshaft 3066899/3043149 for Cummins G50/K50/QSK50 Engine – Raptors

Company Introduction

Raptors, the authorized dealer of Cummins (China), established in 2015 by Mr. Jordan Wang who worked in Cummins (China) for 8 years, Jordan had been responsible for mine market for 4 years during working in Cummins china, so we have big advantages for almost all genuine Cummins generators, engine assembly and spare parts, especially for NTA855, KTA19, KTA38, KTA50, QSK60, QSX15 etc…

Product Parameter

Structure

The body of the camshaft is a cylindrical rod the same length as the cylinder bank. There are several cams on it, which are used to drive the valves. One end of the camshaft is the bearing support point, and the other end is connected to the drive wheel.

The sides of the cam are egg-shaped. The purpose of its design is to ensure sufficient intake and exhaust of the cylinder, specifically to complete the opening and closing of the valve in the shortest possible time. In addition, considering the durability of the engine and the smoothness of operation, the valve should not have too much impact due to the acceleration and deceleration process during the opening and closing actions, otherwise it will cause serious valve wear, increased noise or other serious consequences. Therefore, there is a direct relationship between the cam and the engine’s power, torque output, and smoothness of operation.

Generally speaking, in an in-line engine, one cam corresponds to one valve, and a V-type engine or a horizontally opposed engine shares a cam for every two valves. The rotary engine and the valveless engine do not need a cam due to their special structure.

Camshaft introduction

A camshaft is a component in a piston engine. Its function is to control the opening and closing of the valve. Although the speed of the camshaft in a four-stroke engine is half the speed of the crankshaft (in a two-stroke engine, the speed of the camshaft is the same as that of the crankshaft), but usually its speed is still very high, and it needs to bear a lot of torque, so the design of The camshaft has high requirements in terms of strength and support, and its material is generally special cast iron, and occasionally forgings are used. Since the law of valve motion is related to the power and running characteristics of an engine, the design of the camshaft occupies a very important position in the design process of the engine.

Product Pictures