Products
Cummins QSK60 Engine Part Camshaft 3411289/5376154 Cummins Genuine Part
Function of Camshaft
The camshaft is a component in a piston engine. Its function is to control the opening and closing of the valve.
The main body of the camshaft is a cylindrical rod approximately the same length as the cylinder block. Several cams are set on it for driving valves. The camshaft is supported in the camshaft bearing hole through the camshaft journal, so the number of camshaft journals is an important factor affecting the stiffness of the camshaft support. If the stiffness of the camshaft is insufficient, it will be bent and deformed during operation, which will affect the valve timing.
The sides of the cam are egg-shaped. The purpose of its design is to ensure sufficient intake and exhaust of the cylinder. In addition, considering the durability of the engine and the smoothness of operation, the valve cannot produce too much impact due to the acceleration and deceleration process in the opening and closing action, otherwise it will cause serious wear of the valve, increased noise or other serious consequences. Therefore, there is a direct relationship between the cam and the engine's power, torque output and smoothness of operation.
Camshaft Classification
According to the number of camshafts, it can be divided into two types: single overhead camshaft (SOHC) and double overhead camshaft (DOHC). Single overhead camshaft means there is only one camshaft, and double overhead camshaft means there are two, which is too straightforward to explain. The single overhead camshaft uses a camshaft on the cylinder head to directly drive the intake and exhaust valves. It has a simple structure and is suitable for high-speed engines. In the past, the side-mounted camshaft was generally used, that is, the camshaft was on the side of the cylinder and was directly driven by the timing gear. In order to convert the rotation of the camshaft into the reciprocating motion of the valve, a valve lifter must be used to transmit power. Like this, there are many reciprocating parts, and the inertial mass is large, which is unfavorable for the high-speed movement of the engine. Moreover, the slender tappet has certain elasticity, which is easy to cause vibration, accelerate the wear of parts, and even make the valve out of control. The overhead double camshaft is equipped with two camshafts on the cylinder head, one is used to drive the intake valve and the other is used to drive the exhaust valve. The use of double overhead camshafts does not have high requirements on the design of the camshaft and valve springs, and is especially suitable for the hemispherical combustion chamber with V-shaped configuration of the valves, and is also convenient for use with the four-valve valve train.
Company Introduction
Raptors, the authorized dealer of Cummins (China), established in 2015 by Mr. Jordan Wang who worked in Cummins (China) for 8 years, Jordan had been responsible for mine market for 4 years during working in Cummins china, so we have big advantages for almost all genuine Cummins generators, engine assembly and spare parts, especially for NTA855, KTA19, KTA38, KTA50, QSK60, QSX15 etc...
Product Pictures
PRODUCT CATEGORIES
Focus on providing mong pu solutions for 5 years.
-
Cummins Engine Parts Water Pump 3045163/3051408...
-
Cummins Engine part Valve Stem Seal 3408282 for...
-
Cummins Engine Part Oil Seal 3649551/4100624/40...
-
Cummins Engine Part Crankshaft Gear 3628798/300...
-
Cummins Engine Part Flexible Coupling 3635519 f...
-
Cummins Engine Part Intake Valve Kit 3804867 fo...
