Cummins Engine Part T-Bolt Clamp 3641131/3633975 for Cummins QSK60/QSK45 Engines

T-Bolt Clamp Function

U-One of the biggest disadvantages of double wire clamps and worm gear clamps is the inability to adjust the clamping adaptively. In some pipeline systems with large temperature difference changes, the double steel wire clamp and worm gear clamp cannot compensate for the gap caused by the aging of the rubber hose, the elastic deformation of the rubber hose itself, and the thermal expansion and contraction of the rubber hose, causing the pipeline to appear. varying degrees of leakage. Therefore, after the equipment has been used for a period of time, the phenomenon of water leakage, air leakage and oil leakage in the pipeline is not caused by the failure of the clamps to be tightened before leaving the factory, but the aging of the hose material itself, the change of the medium temperature and the structure that the clamps cannot automatically adjust the clamping structure. Must be retightened manually. Then there is a T-shaped spring clamp with a spring installed at the clamp head. When the clamp is installed, the energy is stored by compressing the spring. When the hose becomes loose, the spring releases energy to compensate, so that the pipeline system is always in a clamped state.