The fuel filter element is used to filter out the sundries in the fuel. The aliases are oil-water separator and diesel fine filter, which are microporous paper filter elements. Fuel filters are all filter filters. The filter elements of gasoline filters include metal sheet gap type, metal filter type, nylon cloth type, porous ceramic type, and so on.
The replacement method of automobile fuel filter element is: 1. Follow the steps specified by the manufacturer to release the residual pressure in the fuel system; 2. Find the ground wire near the steam filter and draw it out; 3. Remove the part of the fuel inlet pipe , Remove the oil outlet pipe next to the filter; 4. Remove the old steam filter directly, put the new steam filter on the fixing frame, and follow the reverse steps to connect the oil outlet pipe, fixing frame screws, oil inlet pipe and grounding Just connect it back.
|Manufacturer Name:||Manufacturer Part # :|
|Stand Pipe||Yes Y/N|
|Outer Diameter||107.3 mm (4.22 inch)|
|Thread Size||1-14 UN|
|Length||263.2 mm (10.36 inch)|
|Gasket OD||98 mm (3.86 inch)|
|Gasket ID||90 mm (3.54 inch)|
|Efficiency 99%||20 micron|
|Emulsified H2O Efficiency||85 Percent|
|Primary Application||DEUTSCH 2 PIN WIF SENSOR|
|Notes||Not for Marine Applications|
|Packaged Length||0.11 M|
|Packaged Width||0.11 M|
|Packaged Height||0.27 M|
|Packaged Weight||2.285 LB|
|Packaged Volume||0.00326 M3|
|Country of Origin||Mexico|
This fuel filter usually used in Caterpillar C18, 3126B, C32, 3406C, 3408E, C15 ATAAC, C18 ATAAC engine for Atlas Copco DM45 drilling equipment, Caterpillar excavator tracked, dozer tracked, and Wirtgen milling equipment.
Focus on providing mong pu solutions for 5 years.